|
|
|
|
| |
|
|
|
|
|
| |
HiPerServ8000: 7U 80
Core IntelŽ
XeonŽ Based HPC Systems Server |
|
| |
|
|
|
|
|
|
|
|
|
|
80
Cores, 640 GB RAM, One
OS |
|
|
|
"Unique 80 core x86 SMP
System"
HiPerServ 8000 is a
high performance, cost
effective x86 SMP
solution built on
industry standard
components. Featuring
the latest Intel Xeon
quad core processors,
this system can be
configured from a
minimum of 8 cores, all
the way up to 80 cores.
Based on the
revolutionary vSMP
architecture,
HiPerServ8000
circumvents the
limitations and
bottlenecks of the
traditional x86 SMP and
clustering
architectures. vSMP
provides affordable
large SMP configurations
with out the added
costs. HiPerServ8000
extends the SMP
architecture across
multiple systems using
hardware aggregation
techniques, thus
presenting a single
system image to the
operating system
and the users.
HiPerServ8000 is
ideally suited for
applications that need
large number of
processing cores or huge
memory configuration or both. The
system can be customized
as per the processing
power and/or memory
requirements.
Applications and
operating systems can be
used as-is with no
modifications. HPC
Systems, Inc. will
provide optimized Linux
kernels for enhanced
performance and assist
in application porting
and optimization.
Contact us for
performance metrics.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Highlights:
- One Operating System
- Supports up to 20 IntelŽ
64-bit XeonŽ Quad Core (80
cores) or Dual Core DP (40
cores) Processors
- Supports up to 640 GB
SDRAM Fully-Buffered DIMM
(FB-DIMM)
- Up to 1 TeraFLOP
computing power per system
- High density, Lowest
power, Lowest TCO
- Up to 60 2.5" SAS
or SATA Hot-swap Drive trays
- Up to four hot-swap
power supplies, N+1
redundant, up to 2000W
- No Cabling required.
Simplified management.
- Multiple applications
tested and performance
metrics available!
Processor:
- Supports IntelŽ
XeonŽ 5400/5300 DP quad-core
or XeonŽ 5000/5100/5200 DP
dual-core processors
- Quad core processors up to
3.2 GHz (Harpertown,
Clovertown)
- Dual core processors up to 3.4 GHz
(Wolfdale, Woodcrest,
Dempsey)
Chipset:
- IntelŽ 5400 (Seaburg)
chipset
- MCH + ESB2
System Memory:
- Supports up to 640GB of
DDR2 Fully Buffered (FB-DIMM)
Memory
- Supports 800 MHz, 667MHz and 533MHz
Memory
- Dual branch memory bus
Networking:
- Intel IO/AT support
- Dual Gigabit Ethernet Ports
- IntelŽ 82563EB Gigabit Network
- 4x DDR (20Gb/s)
Infiniband mezzanine HCA
(Optional)
- One hot-plug 4x DDR IB
switch
- Up to two hot-plug
Gigabit Ethernet switches or
Up to two hot-pluggable
gigabit Ethernet
pass-through modules
Graphics:
- ATIŽ ES1000 16MB PCI graphics
controller
Integrated Hardware Monitor:
- Supports Windows and Linux
based hardware monitoring
- CPU thermal and voltage
monitor support
- 4-pin fan monitoring headers
- 2-pin chassis intrusion
header
- Low noise fan speed control
- CPU overheat LED
Systems Management (optional)
- HPC Systems Server Management
Daughter card Supports IPMI
2.0 specifications via
Chassis Management Module
- O/S Independent Management
- Block Transfer (BT), Keyboard
Controller Style (KCS)
- Serial Console over LAN,
IPMI-over-LAN
- Remote Sensor Monitoring,
Fan Speed Control, Chassis Intrusion,
and System Event Log (SEL)
- Remote Power On/Off and
Reset
- Up to two hot-plug
management modules providing
remote KVM and IPMI 2.0
functionalities
Storage
- Up to 60 hot-swap SATA II
or SAS 2.5" drives
- Onboard LSI SAS 1078 Controller
- RAID 0, 1, 5, 6, 10, 50,
60 support
- Optional, external USB
CD ROM
- Optional, external USB
Floppy drive
Chassis
- 7U form factor
- 470 x 307.34 x 736 mm (W x H
x D) 18.5" x 12.1" x 29" inches
(W x H x D)
Power Supply:
- Up to four hot-swap
1400W / 2000W power
supplies, N+1 redundant
- 16 cooling fans
Front Panel:
- Power and Reset switch
- Power LED, UID / KVM
LED, Network Activity LED,
Fault LED
- SUV (Serial/USB/Video) &
KVM Connector
- KVM button
Operating System:
- Linux OS, kernel level
2.6.11 or later
- Red Hat Enterprise Linux
4/5 (RHEL4/5)
- Novell SuSE Linux
Enterprise Server 10
(SLES10)
- Fedora Core 4 and later
(FC4 and later)
- Open SuSE 10 (SUSE10)
System Operating Environment:
- Operating Temperature:
10°to 35°C (50°to 95°F)
- Non-operating
Temperature: -40°to 70°C
(-40°to 158°F)
- Operating Relative
Humidity: 8% to 90%
(non-condensing)
- Non-operating Relative
Humidity: 5 to 95%
(non-condensing)
Service and Support:
- Two years standard parts
and labor warranty
- Optional on-site maintenance
and support services available
Certifications -
Emissions & Safety:
- US & Canada:
- FCC- Emissions (US)
Verification
- UL60950-1 - CSA/CUL
60950-1
- Europe:
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 -
Harmonics
- EN61000-3-3 -
Voltage Flicker
- CE - EMC Directive
89/336/EEC
- EN60950-1, CE - Low
Voltage Directive
73/23/EEE
- TUV
Ideal For:
High Performance
Computing
- Structural mechanics
- ABAQUS, ANSYS,
LS-DYNA, LSTC etc.
- CFD applications
- FLUENT, ANSYS CFX, CD-adapco,
STAR-CD etc.
- Ray Tracing - OpenRT
- Scientific Computing
- AMBER, NAMD, GAMESS,
GOLD, mpiBLAST, GROMAX,
HMMER, DOCK, MOLPRO
- Forecasting and simulation
- finance, weather
- Oil & Gas -
ECLIPSE, 3DGEO, GeoDepth,
3DPSDM
- MATLAB, MATHEMATICA
- Performance metrics
available!
|
|
|
| HPC Systems, Inc. Provides custom
configuration on all models |
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
